Set Up And Connection; Transport; Removing The Transport Safety Devices - hanseatic HWM6T214A2 Gebrauchsanleitung

Set up and connection

Transport

CAUTION!
Risk of injury!
Improper handling of the appliance
may result in injury.
The appliance is very heavy. Never
■
transport or carry it alone, rather al-
ways with at least two persons.
NOTICE
Risk of damage to property!
Improper handling of the appliance
may result in damage.
If a trolley is used to move the wash-
■
ing machine, it must be lifted as shown
on the packaging. Always transport
the washing machine vertically and
with a built-in transport safety device.
• Check whether the paths of transport and
the installation location are suitable for
the weight of the washing machine. If in
doubt, ask your landlord or property man-
agement.
Removing the transport safety
devices
WARNING!
Risk of electric shock!
Touching live parts may result in severe
injury or even death.
Make sure the appliance is not con-
■
nected to the power supply whilst the
transport safety devices are being re-
moved or installed.
Set up and connection
1. Loosen the screws of the transport safety
devices (15) using a 10 mm wrench.
2. Remove the transport safety devices.
(c)
3. Close the openings with the covers (c)
supplied.
4. Keep the transport safety devices in a
safe place. Re-install the transport safe-
ty devices every time the appliance is
moved - when moving home or returning
the appliance!
Page EN-23
(15)