Programme Sequence Display; End Of A Programme; Switching Off - Miele PFD 402 Gebrauchsanweisung

en - Operation

Programme sequence display

Once a programme has started, the display
shows the programme name, the name of
the current wash phase and the time left un-
til the programme is finished.

Status

Time left
Universal
66°C
Programme parameters such as the actual
and target temperature can be queried dur-
ing a programme sequence.
To do this, tap the coloured bar in the

middle of the upper edge of the display
and swipe downwards.
66
08:15
0:45 h
Main wash 1

End of a programme

After a programme has ended normally, the
LED of the Start/Stop button will go out and
the following will appear on the display.

Programme completed successfully
In addition to this, a buzzer will sound for
approx. 3 seconds (factory default setting).
The buzzer is repeated three times every
30 seconds. To change buzzer settings, see
"Volume".
Tap to acknowledge the display.

If system messages are present, they are
displayed afterwards, e.g. if the salt con-
tainer level or the level of the liquid process
chemicals containers was low during the
programme, or when the next service is
due. Every message needs to be acknow-
ledged individually by pressing OK.

Switching off

Press the  button until the display turns

off.