Operation; Switching On The Dishwasher; Selecting A Programme; Display Of Programme Running Time - Miele PFD 104 SCVi Marine Kurzgebrauchsanweisung

Switching on the dishwasher

 Open the stopcock, if it is closed.
 Open the door.
 Make sure the spray arms can rotate
freely.
 Touch the  sensor control.
If the dishwasher has been switched
off for longer than 1 minute, you will
need to hold the  sensor control for
a bit longer (wipe protection).
The programme selected will appear
briefly in the display and the appropri-
ate sensor control will be illuminated.
Next, the estimated water consumption
may be shown for the chosen pro-
gramme for several seconds.
Then the display will show the estim-
ated duration for the selected pro-
gramme.

Selecting a programme

Choose your programme according to
the type of crockery and the degree of
soiling.
The different programmes and their
uses are described in the "Programme
chart" later on in this booklet.
 Touch the sensor control for the pro-
gramme you want.
The sensor control for the selected pro-
gramme will light up.
Further programmes can be selected
under .
 To do so, touch the  sensor con-
trol.
The first of the further programmes will
appear in the display.
 Use the  sensor controls in the
display to select the programme you
want.
You can now select programme op-
tions.
If any programme options are selected,
the appropriate sensor controls will also
light up.
Display of programme running
time
The estimated duration of the pro-
gramme selected appears in the display
before the programme begins. During
the programme sequence, the time left
until the end of the programme is dis-
played while the door is open.
Symbols appear to indicate which stage
the programme is at:

Pre-wash/Soak

Main wash

Interim rinse

Final rinse

Drying

Finished
The displayed duration may vary for the
same programme. It is influenced by,
for example, the temperature of the in-
coming water, the reactivation cycle of
the water softener, the detergent type,
the amount of crockery and how soiled
it is.
When a programme is selected for the
first time, the display will show the aver-
age running time for a cold water con-
nection.
en - Operation
51