Installation
Installing the extraction hood
Make sure that when drilling the holes no lines are damaged.
Caution!
Please observe your cooker's instruction manual! If a greater
Important!
clearance than 65 cm is specified, this must be taken into
consideration.
1. In order to position the appliance exactly above the cooker in the centre,
make a guide line on the wall (vertical line, with the aid of a spirit level or
plumb line, from the centre of the cooker to the ceiling).
2. Before mounting the extraction hood, fasten valves to ventilation opening of
extraction hood.
3. Slide exhaust hose on air vents of hood and fasten with a hose clamp (not
included in scope delivery), if you would like to use hood in air extraction
mode.
All manuals and user guides at all-guides.com
Valve
Flexible
exhaust pipe
Preparation
Plumb line
11
English