Care and maintenance
4. Clean grease filter in dish-washer or kitchen sink like normal dishes.
5. When grease filter is completely dry, insert it in gap. Let grease filter click
into place.
6. Reestablish the power supply.
The carbon filter is to remove odours. It must be replaced when the odours
Replacement of carbon filter (only for circulating air mode)
generated by cooking can no longer be sufficiently filtered. If used regularly, the
filter should be replaced approximately every three months.
1. Disconnect the mains plug or isolate at the appropriate main fuse.
2. Open the glass panel of the extracting hood.
3. Unlock grease filters and carefully remove grease filters.
4. Turn grease filter loose from motor and remove it. Filters may be disposed of
in normal household waste.
5. Insert the new carbon filters as shown and allow the locks to click into place.
6. Insert grease filter in gap and let it click into place.
7. Reestablish the power supply.
16
All manuals and user guides at all-guides.com
General