Commissioning Report - Austroflamm Clou Pellet Benutzerhandbuch

English

14 COMMISSIONING REPORT

Operator/Customer
Name
Street
Postcode
Telephone
Email
Pellet stove
MODEL
Serial number
Technical defects
Visual defects
Accessories
On-site conditions
Firebox door seal inspected
Other
□ brick □ stainless steel □ fireclay
Chimney type
Diameter of chimney:
Chimney – Approved by chimney sweep: □ yes □ no
Controlled domestic ventilation: □ yes □ no
Appliance - preparation for start and function test
Pellet hopper full
Pellet quality: e.g. ENplus A1
"Riddling grate" function tested
Keramott fired "white"
Instructions for the operator/customer
Handling of the appliance explained intelligibly
Terms and conditions of the guarantee and warranty
explained
Glove □ Operating instructions □
The end customer hereby confirms that he/she can now put the stove into operation without assistance. He/she
further confirms that the pellet stove has been handed over in a fully functional state and is free of defects.
------------------
Place, Date
Austroflamm GmbH, Austroflamm-Platz 1, 4631 Krenglbach, Austria, Tel. 0043/7249/46443,
Town/City
Height of chimney:
---------------------------
Signature of operator/customer
30
Retailer/Installer
Company
Street
Postcode
Telephone
Email
Number of deflectors:
Total length of the flue pipes:
Flue pipes in plug-in system
ing lip
Sea level:
Chimney draught – Actual value:
Flue pipe diameter:
Outside temperature during draught measurement:
Cleaning and maintenance interval explained
Photographic documentation of the CURRENT state of
the "pellet stove installation"
(Please be sure to obtain the customer's consent
Testing the heating function of the appliance to-
gether with the customer (start, combustion and
burnout phases completed)
Town/City
□ with sealing lip □ without seal-
Target value: 12 Pa
beforehand!)
-----------------------------------
Signature of installer
info@Austroflamm.com