Symbols On The Battery And/Or On The Battery Charger; Safety; Safety Definitions; Electrical Safety - Husqvarna 120i Bedienungsanweisung

direction of the operator. Risk of serious
injury or death.
(Fig. 11) The direction in which the saw chain
rotates and maximum length of the guide
bar.
(Fig. 12) Chain brake, engaged (right). Chain
brake, disengaged (left).
(Fig. 13)
Chain oil fill.
(Fig. 14) Direct current.
(Fig. 15) Do not expose to rain.
(Fig. 16) Environmental mark. The product or
package of the product is not domestic
waste. Recycle it at a recycling station for
electrical and electronic equipment.
(Fig. 20)

Safety definitions

The definitions below give the level of severity for each
signal word.
WARNING:
CAUTION:
Note:
This information makes the product easier to
use.

General power tool safety warnings

WARNING:
and all instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
Note:
Save all warnings and instructions for future
reference. The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1259 - 003 - 14.09.2020
The rating plate shows se-
rial number. yyyy is the
production year, ww is the
production week.
Injury to persons.
Damage to the product.
Read all safety warnings
Note:
Other symbols/decals on the product refer to
certification requirements for some markets.
Symbols on the battery and/or on the
battery charger
(Fig. 21)
(Fig. 17)
Fail-safe transformer.
(Fig. 18) Use and keep the battery charger indoors
only.
(Fig. 19)
Double insulation.

Safety

Work area safety
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.

Electrical safety

• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk
of electric shock.
Recycle this product at a recy-
cling station for electrical and
electronic equipment. (Applies
to Europe only)
19