Introduction - Parkside PADM 1250 A1 Originalbetriebsanleitung

Content
Introduction ............................... 21
Proper use ................................. 22
General description .................... 22
Scope of delivery ...........................22
Description of functions ...................22
Overview .....................................22
Technical data ............................ 23
Safety information ..................... 23
Graphical symbols .........................23
General safety instructions ..............24
General Safety Instructions
for Power Tools ..............................24
Safety information for
surface planers and thicknessers ......26
Safety equipment ...........................26
Residual risks .................................27
Fixed installation ....................... 27
Commissioning
the surface planer ...................... 27
Mounting the rip fence ....................27
Attaching the crank handle ..............27
Mounting the chip extractor .............27
Commissioning the thicknesser ... 28
Mounting the chip extractor .............28
Checks before
putting into operation ................ 28
Checking the switch
and blade brake ............................28
Checking the anti-kickback claws .....28
General working instructions ..... 29
Application and storage
of the push stick .............................29
Working instructions
for surface planers .........................29
Working instructions for thicknessers ..29
Switching on/off ........................ 29
Overload protection .......................29
Operating the surface planer ..... 30
Adjusting the rip fence ....................30
Adjusting the planer blade cover .....30
Setting the cutting depth ..................30
Operating the thicknesser .......... 30
Setting the cutting depth ..................30
Replacing and
aligning the blades .................... 30
Cleaning and servicing ............... 31
Cleaning .......................................31
Maintenance .................................31
Storage ...................................... 31
Transport ................................... 32
Disposal/environmental
protection ................................... 32
Troubleshooting ......................... 32
Spare parts/accessories .............. 33
Guarantee ................................. 34
Repair Service ............................ 35
Service-Center ............................ 35
Importer .................................... 35
Translation of the original EC
declaration of conformity ......... 151
Exploded Drawing ................... 161
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product. During production,
this equipment has been checked for qual-
ity and subjected to a fi nal inspection. The
functionality of your equipment is there-
fore guaranteed. In some cases, residual
amounts of lubricants may be present on or
in the device. This is not a fl aw or a defect
and is no cause for concern.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal. Before using the product, fa-
miliarise yourself with all of the operating
and safety instructions. Use the product
only as described and for the applications
specifi ed. Keep this manual safely and in
the event that the product is passed on,
hand over all documents to the third party.
GB IE
21