General Description; Extent Of The Delivery; Overview - Parkside POFA 12 A2 Originalbetriebsanleitung

GB IE
For security reasons, the device is not in-
tended for children and young people un-
der the age of 16. Young people aged 16
and over may only use the device under
adult supervision.
The device is not designed for commercial
use. Commercial use will invalidate the
guarantee. The manufacturer cannot be
held liable for damage when the appliance
is not used in conformity with its intended
purpose or due to incorrect operation.
The electric tool was designed for the
following cutter types:
- Profile cutter (Ø 25 mm, R 4 mm)
- Rounding cutter (Ø 22 mm, R 6.3 mm)
- V-notch cutter (Ø 12.7 mm,
- Notch cutter (Ø 12 mm)
- Notch cutter (Ø 6 mm)
- Fillet cutter (Ø 22 mm, R 6.3 mm)
The device is part of the PARKSIDE
X 12 V TEAM series and can be opera-
ted using PARKSIDE X 12 V TEAM series
batteries. The batteries may only be char-
ged using chargers from the PARKSIDE
X 12 V TEAM series.

General description

The illustrations are on the
front and back foldout pages.

Extent of the delivery

Carefully unpack the appliance and check
that it is complete. Dispose of the packag-
ing material correctly.
- Cordless Router
- Suction adapter
- Parallel stop
- Collet chuck 6 mm
24
- Collet chuck 8 mm (preassembled)
- 6-part cutter set
- Combination wrench
- Case
- Instruction Manual

Overview

90°)
)
Battery and charger are not
included.
Machine:
1 Rechargeable battery
2 Battery release button
3 Upper handle
4 Right handle
5 Drive unit
6 Button for cutting depth rough
adjustment
7 Setting knob for cutting depth
fine adjustment
8 Locking screw
Cutting depth adjustment
9 Baseplate
10 Spindle locking button
11 Cap nut
12 Collet chuck 8 mm, preassembled
(not visible)
13 Recess for suction adapter
14 Parallel stop receptor
15 Retaining screw
16 Cutting depth adjustment locking
knob
17 Battery charge level indicator
18 On/Off switch
Accessories:
19 Combination wrench
20 Collet chuck 6 mm
21 Suction adapter
22 Parallel stop
23 Charger