Stopping The Engine - Makita EVH2000 Originalbetriebsanleitung

(6) Hold the element cover with a left hand to prevent the engine from moving,
settle down to take the stable position.
(7) Pull out slowly the starter handle till a certain resistance is felt. Return the
starter handle backward once from this position, then pull it out with force.
• Never pull the rope to the full.
• Once the start knob is pulled, never release your hand immediately. Hold
the start knob until it returns to its original point.
(8) When the engine starts, open the choke lever.
• Open the choke lever progressively while checking the engine operation.
Be sure to open the choke lever to the full in the end.
• In cold or when the engine is cooled down, never open the choke lever
suddenly. Otherwise, the engine may stop.
(9) Continue warm-up operation for 2 to 3 minutes.
(10) Rotation of the engine speed stabilizes and when from low speed making
at high speed rotation, if reaches the point where it accelerates smoothly,
it is completion of warming-up.
2) When the engine is warm
(1) Place the engine on a flat ground.
(2) Press the primary pump several times.
(3) Confirm that the choke lever is open.
(4) Hold the element cover with a left hand to prevent the engine from moving, settle down to take the stable position.
(5) Pull out slowly the starter handle till a certain resistance is felt. Return the starter handle backward once from this position, then pull it out
with force.
(6) When the engine is difficult to start, open the throttle valve by about 1/3.

STOPPING THE ENGINE

1) Turn the nozzle lever to the CLOSE position.
2) Turn the I-O switch to "O" Position.
3) Move the throttle lever to the SLOW position.
SLOW
Throttle lever
1
Open
NOZZLE LEVER
CLOSED
O (OFF)
I-O switch