Cleaning The Tool; Blade Maintenance; Optional Accessories - Makita UM600DSAE Betriebsanleitung

Cleaning the tool

Clean the tool by wiping off dust with a dry cloth or one
dipped in soapy water and wrung out.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.

Blade maintenance

Before the operation or once per hour during operation, apply low-vis-
cosity oil (machine oil, or spray-type lubricating oil) to the blades.
► Fig.50
► Fig.51
After operation, remove dust from both sides of the blades with
a wired brush, wipe it off with a cloth and then apply low-viscos-
ity oil (machine oil, or spray-type lubricating oil) to the blades.
► Fig.52
► Fig.53
NOTICE:
Do not wash the blades in water. Doing
so may cause rust or damage to the tool.
NOTICE:
Dirt and corrosion cause excessive
blade friction and shorten the operating time per
battery charge.
Storage
The hook hole in the tool bottom is convenient for hang-
ing the tool from a nail or screw on the wall.
Attach the blade cover to the shear blades so that the blades
are not exposed. Store the tool out of the reach of children.
Store the tool in a place not exposed to moisture or rain.
► Fig.54: 1. Hole
► Fig.55: 1. Hole

OPTIONAL ACCESSORIES

CAUTION:
These accessories or attachments
are recommended for use with your Makita tool spec-
ified in this manual. The use of any other accessories or
attachments might present a risk of injury to persons. Only
use accessory or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Shear blade assembly (for grass shear use)
• Shear blade cover (for grass shear use)
• Grass receiver (for grass shear use)
• Long handle attachment (for grass shear use)
• Shear blade assembly (for hedge trimmer use)
• Shear blade cover (for hedge trimmer use)
• Chip receiver (for hedge trimmer use)
• Storage case
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
18 ENGLISH