Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Page EN-16
Operation
Operation
Control elements
(13)
(14)
(15)
(13) Timer sensor
for setting the switch-
off delay
(14) Sensor
for switching the light on and
off
(15) Slider for selecting and displaying the
fan level, switch-off delay time
(16) Sensor
for switching the fan on and
off
(17) Sensor
for switching the appliance
on and off
Requirements
– You have read chapter „Safety" on page
EN-4 and understand all the safety notices.
– The exhaust hood is assembled as descri-
bed in chapter „Assembly" on page EN-12.
Lighting
The exhaust hood is equipped with an LED
light.
• To switch the lighting on or off, touch the
sensor (14)
Switching the appliance on/ off
To switch the appliance
• on, touch the sensor (17).
The background lighting switches on and
the motor works with a low fan speed.
• off, briefly touch the sensor (17).
The fan switches off and all LEDs go out.
(16)
(17)
Setting the fan speed
1. Touch the sensor (16).
The sensor lighting flashes and the first
three bars of fan speed selector (15) flash.
2. As long as the sensor lighting is flashing,
you can set the required fan level using
the slider (15).
If you do not make any setting for 15 se-
conds, the flashing stops.
.
Werbung
Kapitel
Inhaltsverzeichnis
