Setting And Cutting The Food; Release And Replacement Of The Discs - CombiSteel 7455.0080 Gebrauchsanweisung

All manuals and user guides at all-guides.com

4.3 Setting and cutting the food

Lift the handle and set the food inside the opening as shown in figure n.3, then close the handle. Press the green
start button with your right hand and with your left hand, lightly move the handle downwards until food is fully
used up.
Lift the handle to introduce other food. The machine starts automatically when the handle is closed. Repeat
these operations until the food is fully used up.
It is possible to use the two openings with a single disc. When two discs are used for cutting sticks and match-
like food, the inlet opening set over the grid must use the smaller round openings is used to slit vegetables as
carrots, vegetable marrows, and so on.
Warning: never use your hand, but press the vegetable with the pestle supplied.

4.4 Release and replacement of the discs

Turn the knurled handle and lift the cover (fig.1).
Turn the disc counter anticlockwise and cover the cutting edge with appropriate materials as rubber, fabric, etc.,
then lift it by setting your hand under the disc. Simply lift the discs to remove the grid disc for dice cutting, or
the disc for stick cutting with the plastic disc (fig 4-5).
7
www.combisteel.com