Operation Instructions; Turning On The Appliance; Cleaning And Maintenance - CombiSteel 7472.0005 Gebrauchsanweisung

3 OPERATION INSTRUCTIONS

INSTRUCTIONS TO PERSONNEL FOR OPERATION AND CARE
COMBISTEEL CHICKEN SPITS ARE PROFESSIONAL EQUIPMENT. ALL ASSEMBLY AND CONNECTION PROCEDURES,
TESTING AND REQUIRED REPAIRS MUST BE CARRIED OUT BY SPECIALIZED AND AUTHORIZED PERSONNEL ONLY.
COMBISTEEL BV CANNOT BE HELD RESPONSIBLE FOR ANY NEGATIVE CONSEQUENCES IN CASE OF
INTERVENTIONS BY NONSPECIALIZED TECHNICAL PERSONNEL OR DUE TO NONCOMPLIANCE WITH FACTORY
INSTRUCTIONS.

3.1 TURNING ON THE APPLIANCE

After making sure the appliance has been correctly connected to electricity, you can start using it.
Heating Elements
7472.0030, 7472.0035, HK5, HK3A, HK9
POSITION 1: Both operate at low rate.
POSITION 2: Front element operates at high rate.
POSITION 3: Both operate at high rate
7472.0040, NHK4
1) Down switch operates the two heating elements at the bottom of the appliance.
POSITION 1: Both operate at low rate.
POSITION 2: Front element operates at high rate.
POSITION 3: Both operate at high rate.
2) Above switch operates the above heating element to position 3.
Motor
Switch on / off operates the motor for the rotation.

3.2 CLEANING AND MAINTENANCE


Turn off the heating elements before any cleaning or maintenance procedures. Let the appliance cool and
make sure it has been unplugged from the main supply.

At the end of the working day, remove the broach and clean them thoroughly, empty and clean fat collecting
drawer.

Clean with a wet cloth the purex glass and doors.
Never use running water to clean the appliance.
www.combisteel.com
8