Cleanliness And Protection; Troubleshooting Guides; Electric Theory; The Temperature Of The Popcorn Pot Are Adjustable - CombiSteel 7455.0810 Gebrauchsanweisung

5. Cleanliness and protection

1. Cut off the electricity power and pull out the plug to avoid accidents when you clean the machine.
2. Use a wet towel with some anticorrosive detergent to clean the outside parts of the machine. Do not clean
the machine directly with water. Otherwise the electric function will be damaged.
3. If it is not used for a long time, you should cut off the electricity and pull out the plug.
4. Do not brush the inside part of the plate with hard metal. Otherwise you will damage the coat.

6. Troubleshooting guides

Nr. Problem
1 Light not on
2 Cannot heat
3 Too high or too low
temperature
Appendix to machine:
1. an operation manual
2. a bulb

7. Electric theory

R2: Heating pipe
R1: Tubular holding
T: Lighting lamp
K1: Heat-insulation, lighting switch
K3: Blender motor switch
8. The temperature of the popcorn pot is adjustable.
1. Increase the temperature by turning the knob clockwise.
2. Decrease the temperature by turning the knob counter clockwise.
Causes
Not plugged in outlet
1. loose in wire of the
heated tube
2. heated tube burnt
3.broken electric capacity
Problem with the
thermostat
Y2: Heating relay
PW: Heat-insulation relay
D: Blender motor
K2: Heating-set switch
P: Fuse
www.combisteel.com
Possible remedies
1. fasten the screw and connect the wires
2. change the light bulb
1. fasten the screw where the wires come out.
2. change the heated tube.
3. change the electric capacity.
Change the thermostat
4