Transportation; Setting Up; Power Supply; Cleaning And Hygiene - CombiSteel 7054 Serie Gebrauchsanweisung

TRANSPORTATION

Use pallet or forklift to transport the appliance. Do not move it alone if you don`t have such opportunity.
Appliance`s center of gravity is located in the middle of the frame. Pay attention to this point when moving by
pallet, forklift or any other way.

SETTING UP


Set up the appliance on a level surface.

Make sure the appliance is set up properly when operatıng.

POWER SUPPLY


Make sure power supply connection is carried out by qualified personnel.

Make sure that the voltage of your power supply system suits appliance's electrical system.

Do not use the appliance if any part of cable or plug is damaged.

CLEANING AND HYGIENE


Start the cleaning only after finishing operating and shutting down the appliance.

Remove the plug from socket before cleaning.

Clean the frame and the ventilation with wet cloth.

Do not clean the appliance with pressurized water.

Do not clean the appliance when operating.

Start operation only after drying.
Do not move the appliance alone if you don`t have opportunity to transport
it by pallet or forklift. The center of gravity is in the middle of the frame.
Pay attention to this point when transporting
Do not transport the appliance by dragging along the ground.
Stop the appliance and unplug from the appliance before cleaning.
Do not clean the appliance when operating.
Do not clean the appliance with pressurized water.
www.combisteel.com
4