Safety Measures And Training The Final User; Use Of The Equipment; Controls; Setting The Discs On The Machine - CombiSteel 7455.0080 Gebrauchsanweisung

3.3 Safety measures and training the final user

The skilled personnel in charge of the installation and electric connections of the equipment is responsible for
the training of the final user, which must also include information on the safety measures to be complied with.
This instruction manual comes with each equipment.

4. Use of the equipment

4.1 Controls

The controls and pilot light are set on the right side of the base when the machine is located in front of the
operator.
1. Green button for starting the machine
2. Red button for stopping the machine

4.2 Setting the discs on the machine

Rotate the knob as shown in figure n.1 and open the cover. Set first the plastic ejecting disc (2), then the disc
selected for the cutting. Close the cover and reverse the rotation of the handle. Work on the start button to
automatically hook the discs in the correct position.
All manuals and user guides at all-guides.com
www.combisteel.com
6