Operating Instructions; Explanation; Purpose Of; Warnings And Signs - CombiSteel 7054 Serie Gebrauchsanweisung

OPERATING INSTRUCTIONS

EXPLANATION

This document provides information on installation, operation, safety, cleaning and hygiene, troubleshooting,
maintenance of vegetable chopping machine and also warranty terms and contact information you may need to
know.
Read this manual before starting work for your own safety and safety of others.
You may apply to technical service for further information.

PURPOSE OF

1. Used for chopping onions and vegetables. Do not go beyond the intended use.
2. The device is intended for industrial use and should only be used by trained personnel.
3. Place the device on a flat and stable surface.
4. Make sure that the cutter blade of your machine passes the grooves on the blade onto the shaft.
5. The cover of your machine has a sensor and the machine does not work while the cover is open.
6. After you put the material in the pan of your machine, place the lid on the pan and turn it so that it fits into
the slot. Otherwise the machine will not work.
7. Push the START button to run the machine.
8. Push the STOP button to stop the machine.
9. After finishing the material, remove the plug from the socket.
10. Use a fire extinguisher for any reason in the area where the machine is used by closing gas valves and
electrical conditions
NEVER USE WATER FOR EXTINGUISHING FLAME

WARNINGS AND SIGNS

Descriptions of warnings and instructions specified in operation instructions and labeled on the appliance.
DANGEROUS SITUATION MAY OCCUR. SERIOUS INJURE AND/OR DEATH
READ THE MANUAL BEFORE STARTING ANY OPERATION WITH THE APPLIANCE
MAY BE CAUSED IF YOU FAIL TO FOLLOW THE INSTRUCTIONS

ELECTRICAL HAZARD

RISK OF ELECTRICAL HAZARD
MOVING PARTS CAN CUT AND CRUSH
DANGER OF HANDS OR BODY ENTANGLEMENT
OPERATION INSTRUCTIONS
www.combisteel.com
DANGER
4