Supply Conditions And Disposal Of Packings; Installation; Setting The Machine; Electrical Connections - CombiSteel 7455.0080 Gebrauchsanweisung

2.2 Supply conditions and disposal of packagign
The cutting machine is packed in a sturdy cardboard box with internally shaped edges which guarantee the
perfect integrity of the machine during transport.
The equipment includes:

Instructions for use and maintenance

High ejecting disc and low ejecting disc
All the packing components (carton, foam, straps, and so on) can easily be disposed of as household rubbish.

3. Installation

3.1 Placing the machine
The machine connection and the placement at work must be done by skilled personnel.
Warning: both the system and location where the equipment has to be set must comply with the regulations for
the accident prevention and electrical regulations in force.
The manufacturer declines any and all responsibility for direct or indirect damages which may ensue from non-
compliance with the above mentioned regulations.
Place the equipment on a wide, levelled, dry and fixed face, far from heat sources and water sprays.

3.2 Electrical connections

The equipment is supplied with an electric cable to be connected to a magneto-thermic main switch which stops
the machine when the operator comes in fortuitous contact with the rotating elements. It is imperative that the
equipment is well grounded according to the regulations in force.
All manuals and user guides at all-guides.com
www.combisteel.com
5