Menu Settings - Renkforce BT-RSD1802K Bedienungsanleitung

Operation

Menu Settings

• VOLUME rotary control / SELECT button (9)
To select the menu settings, please push the SELECT button a little longer (>2 seconds) and then push this button
once more, but only very briefly, until the desired function appears on the display.
Choose the options for the respective settings by turning the VOLUME control.
BEEP ON / OFF
BEEP ON: Every activation of a button is confirmed by a signal sound.
BEEP OFF: The sound confirmation function is deactivated.
P-VOL
Set the activation volume of the device here by turning the VOLUME dial.
AREA EUR / USA
AREA EUR: Radio frequency band setting for Europe
FM 87.5-108 MHz / 50 kHz steps
AM 522-1620 kHz / 9 kHz-steps
AREA USA: Radio frequency band setting for USA
FM 87.5-107,9 MHz / 100 kHz steps
AM 530-1710 kHz / 10 kHz-steps
AF ON / OFF
AF ON: AF is switched on
AF OFF: AF is switched off
The AF function activates automatic station tracking (see "Radio Operation").
"AF" will be displayed. If the reception of an RDS transmitter station gets weaker or the radio does not receive and
RDS station at all, the display flashes. When a station can be received well, the symbol is displayed continuously.
When you leave a transmission area, the radio can only switch to a better station when the AF function is activated
(AF ON).
62

Operating Instructions
English