Renkforce BT-RSD1802K Bedienungsanleitung Seite 53

Mechanical Installation
The remote control must not be placed in the airbag trigger area.
The remote control must be installed on the steering wheel so that it cannot impair the driver
in steering and operating of the vehicle.
Tighten the holder's rubber band well to ensure that the remote control cannot come loose
during the drive.
The remote control must be attached to the inside of the steering wheel to prevent impairment
when steering.

The best installation site for the remote control depends on the installation site of the SD tuner. Before
final installation, try it out to ensure proper function. The IR transmitter is located on the rear of the
remote control.
53