Renkforce BT-RSD1802K Bedienungsanleitung Seite 60

Operation
• LC Display (3)
The LC-display (3) shows all the information, depending on the audio source that is being played (radio, SD-player
etc.).
• DSP / TA button (2)
With this button various information can be displayed on the LC display (3). Press the button once more to move to
the next display.
When the button is not activated anymore, the display returns to the original information after a little while.
The button can also be used to set the time manually.
Switching the display information
When an RDS station is being received:
Radio operation:
SD/USB operation:
When receiving a non-RDS station:
Radio operation:
SD/USB operation:
Setting the Time
Push the button briefly until the time is displayed.
Then hold the button pushed until the time display flashes.
Use the button  (1) to set the minutes and the button  (8) to set the hours.
60
Station name > Time > Program type
Track display > Time > ID3 Information > Station name > Transmission frequency >
Program type
Transmission frequency > Time > PTY NONE
Track display > Time > ID3 Information > Transmission frequency > PTY NONE

Operating Instructions
English