Connecting The Ethernet Stick Lse-3 - REFU REFUsol 50K-3T Bedienungsanleitung

3. Feed relay cable through PG cable gland.
4. Assemble and connect the wires of the relay cable
to the terminal strip.
5. Tighten the union nut of the PG cable gland.
6. Check proper installation of the cable gland and
tightness.
▷ Close the connection box cover using the Allen key
and check that it is firmly seated.
REFUsol 50K-3T
982081 | 03 | 2021-03

4.11.4Connecting the Ethernet Stick LSE-3

CNT10
1. Remove the WiFi/GPRS cover of the connection area
with a Phillips screwdriver.
2. Slightly loosen the cable gland of the Ethernet
adapter.
3. Plug the shielded RJ45 Ethernet cable into the
Ethernet stick.
4. Tighten the cable gland and check for tightness and
strain relief.
5. Plug the Ethernet stick into the "WiFi/GPRS" con-
nection.
6. Fasten the Ethernet stick with two screws.
Installation
Connect Communication
41