Important:
It is not recommended to mount the upper wall adapter higher than the rule of thumb
䕲
listed above. If it is mounted higher, a step ladder, chair or similar elevation may have
to be used later when hanging the Superbelt to be able to reach the upper adapter.
*
Attention:
When choosing the distance between the upper and lower wall adapters, please bear
䕲
in mind that the Superbelt will have to be hooked into the adapters and tightened
later!
The distance between the two adapters depends on your height, but due to the
䕲
length of the Superbelt, a MAXIMUM distance of 220 cm (86.6 inch) between the two
adapters is recommended!
max. distance
Superbelt
49
upper
wall adapter
220 cm
(86.6 inch)
lower
wall adapter