Storage; Disposal - Parkside PLEM 50 C2 Bedienungs- Und Sicherheitshinweise

Clean the laser beam output opening
with a gentle air stream. In the case of more serious con-
3
tamination, remove the dirt with a damp cotton swab. Do not
exert any strong pressure!
Never use petrol, solvents or cleaning agents that attack plastic.
qualified person for repairs.
To clean the casing, use a soft dry cloth.
Keep the product clean to ensure fault-free operation.

Storage

If you decide not to use the product for a long period, remove
the batteries and store it in a clean, dry place away from direct
sunlight.

Disposal

The packaging is made entirely of recyclable materials, which you
may dispose of at local recycling facilities.
Observe the marking of the packaging materials for waste
separation, which are marked with abbreviations (a) and
b
a
numbers (b) with following meaning: 1–7: plastics /
20–22: paper and fibreboard / 80–98: composite
materials.
The product should only be opened by a
and the receiver lens
4
GB/IE 57