Maintenance And Cleaning; Storage; Disposal - Parkside PKLL 10 B3 Originalbetriebsanleitung

4. Check the tight fitting of the quick shoe
head .
18

Maintenance and cleaning

The product requires no maintenance.
ATTENTION! Never submerge the product in water or other liquids.
Do not allow water to enter into the product during cleaning.
Keep the product clean to ensure good, secure work.
Use a dry cloth to clean the outside.
Clean the laser beam opening
heavy contamination, remove the dirt with a slightly damp Q-tip.
Do not exert any strong pressure!
opened by a professional.
Have the measuring tool repaired by qualified professionals and
only with original replacement parts. This ensures that the safety of
the measuring tool is maintained.

Storage

If you will not be using the product for a prolonged period of time,
remove the batteries and store it in a clean, dry place that is not
exposed to direct sunlight.

Disposal

The packaging is made entirely of recyclable materials, which you
may dispose of at local recycling facilities.
Observe the marking of the packaging materials for waste
separation, which are marked with abbreviations (a) and
b
a
numbers (b) with following meaning: 1–7: plastics / 20–22:
paper and fibreboard / 80–98: composite materials.
The product and packaging materials are recyclable, dispose
of it separately for better waste treatment. The Triman logo
is valid in France only.
Contact your local refuse disposal authority for more details
of how to dispose of your worn-out product.
For repair purposes the product may only be
within the tripod flat
19
with a soft air jet. In cases of
7
GB/IE 27