Maintenance; Adjustments; External Cleaning; Cleaning The Cladding - Sime UNIQA REVOLUTION 25 Installations-, Gebrauchs- Und Wartungsanleitung

EN
8

MAINTENANCE

8.1

Adjustments

For the appliance to operate correctly and efficiently it is recom-
mended that the User calls upon the services of a Professionally
Qualified Technician to carry out ANNUAL maintenance.
m
CAUTION
– The maintenance interventions described must
ONLY be carried out the professionally qualified
personnel who MUST wear suitable protective safety
equipment.
– Make sure that the system components and pipes
are not hot (risk of burning).
a
WARNING
Before carrying out any interventions described:
– set the main system switch to "OFF"
– close the gas valve
– make sure that no hot parts inside the appliance are
touched.
OFF
8.2

External cleaning

8.2.1

Cleaning the cladding

When cleaning the cladding, use a cloth dampened with soap
and water or alcohol for stubborn marks.
d
IT IS FORBIDDEN
to use abrasive products.
8.3

Cleaning the inside of the appliance

m
CAUTION
External casing seals off the appliance from the envi-
ronment in which it is installed. Check regularly, and
always after performing maintenance work, that the
front, side and all gaskets have been correctly closed
and are not worn or damaged.
To clean the inside:
– remove the screws (1), pull the front panel (2) forwards and
release it from the top by lifting it
2
Fig. 52
8.3.1

Cleaning the air evaporator

– unscrew the eight screws (3) and remove the inspection cover
(4)
– use a hoover to remove any dirt.
1
Fig. 53
3 4
Fig. 54
43