Structure Components - IFM Electronic ecomot100 CR2511 Gerätehandbuch

Data structure:
CR2511 ConfigStruct
Purpose:
Parameter and configuration data
can be written or read.
The data structure is assigned to the
function input "CFG_DATA" via the
ADR operator.

Structure components

Name Data type
GUARDTIME TIME
LIFETIME BYTE
Ch1 BYTE
Ch2 BYTE
Ch3 BYTE
Ch4 BYTE
Ch5 BYTE
Ch6 BYTE
Ch7 BYTE
Ch8 BYTE
PwmFrq BYTE
Note:
All manuals and user guides at all-guides.com
Description
Guarding time of the module [msec.]
Lifetime of the module
Config. channel 1
Config. channel 2
Config. channel 3
Config. channel 4
Config. channel 5
Config. channel 6
Config. channel 7
Config. channel 8
PWM frequency in Hz
Range = 20 to 250 Hz (100 Hz)*
Mode 5 is only available if connection is made via the outputs with
current monitoring (see also page 30, Wiring).
*) default
OUTPUT MODULE
TYPE CR2511 ConfigStruct
STRUCT
GUARDTIME: TIME;
LIFETIME: BYTE;
Ch1: BYTE; (*2000/1*) (*0,2,4,5*)
Ch2: BYTE; (*2000/2*) (*0,2,4,5*)
Ch3: BYTE; (*2000/3*) (*0,2,4,5*)
Ch4: BYTE; (*2000/4*) (*0,2,4,5*)
Ch5: BYTE; (*2000/5*) (*0,2,4,5*)
Ch6: BYTE; (*2000/6*) (*0,2,4,5*)
Ch7: BYTE; (*2000/7*) (*0,2,4,5*)
Ch8: BYTE; (*2000/8*) (*0,2,4,5*)
PwmFrq: BYTE; (*2001/0*)
END_STRUCT
END_TYPE
0 = disabled (OFF)
2 = binary output *
4 = analog output (PWM)
5 = analog output (PWM; current-controlled)
0, 2*, 4, 5 (see Ch1)
0, 2*, 4, 5 (see Ch1)
0, 2*, 4, 5 (see Ch1)
0, 2*, 4, 5 (see Ch1)
0, 2*, 4, 5 (see Ch1)
0, 2*, 4, 5 (see Ch1)
0, 2*, 4, 5 (see Ch1)
CR2511
45
PAGE