Structure Components - IFM Electronic ecomat 100 CR2011 Gerätehandbuch

Data structure:
CR2011 ConfigStruct
Purpose:
Parameter and configuration data
can be written or read.
The data structure is assigned to the
function input "CFG_DATA" via the
ADR operator.

Structure components

Name Data type
GUARDTIME TIME
LIFETIME BYTE
Ch1_2 BYTE
Ch3_4 BYTE
Ch5_6 BYTE
Ch7_8 BYTE
PwmFrq BYTE
Note:
*) default
All manuals and user guides at all-guides.com
Description
Guarding time of the module [msec.]
Lifetime of the module
Config. channel 1/2 0 = disabled (OFF)
Config. channel 3/4 0 = disabled (OFF)
Config. channel 5/6 0 = disabled (OFF)
Config. channel 7/8 0 = disabled (OFF)
PWM frequency in Hz
Range = 20 to 150 Hz (100 Hz)*
Mode 5 is only available if connection is made via the outputs with
current monitoring. (see also page 27, Electrical connection).
OUTPUT MODULE
TYPE CR2011 ConfigStruct
STRUCT
GUARDTIME: TIME;
LIFETIME: BYTE;
Ch1_2: BYTE;
Ch3_4: BYTE;
Ch5_6: BYTE;
Ch7_8: BYTE;
PwmFrq: BYTE;
END_STRUCT
END_TYPE
2 = binary output *
4 = analog output (PWM)
5 = analog output (PWM; current-controlled)
2 = binary output *
4 = analog output (PWM)
5 = analog output (PWM; current-controlled)
2 = binary output *
4 = analog output (PWM)
5 = analog output (PWM; current-controlled)
2 = binary output *
4 = analog output (PWM)
5 = analog output (PWM; current-controlled)
CR2011
41
PAGE