Product
presentation
III.
Loosen the half-ferrules by rotating them.
IV.
Remove the 2 half-ferrules by lifting them and place them away from the work on the water heater.
4.
Troubleshooting
In case of any malfunction, absence of heating or release of steam when drawing off, turn off the power supply and
notify your installer.
Repair work should only be performed by a professional.
4.1.
Problem solving/malfunction indication
For every malfunction, the LED indicator
4.1.1. Problem / solving "Tank" malfunction indication
Error code
Err 03 Electrical malfunction
of the water sensor
Err 07 ACI malfunction
Err 09 Water too hot
58
Installation
2
1
Maintenance,
Settings /
Servicing and
Operation
Troubleshooting
2
1
2
1
is solid.
Indication
The LED will flash twice
The LED will flash 3 times
The LED will flash 4 times
Warranty