Promise Technology FastTrak66 Anwenderhandbuch Seite 43

Manual EN 05-08-1999 11:30 Pagina 39
Fastcheck™ Monitoring Utility
Step 3 confirms the Target or "Rebuild" disk by Array # and drive ID. Click
Finish button to initiate physical Rebuild, Back button to review Step 2, or
Cancel button to Stop.
Rebuild Progress Bar
Once Array Rebuild is started, users are returned to the FastCheck Monitoring
window. A progress bar will appear at the bottom of the FastCheck Monitoring
window similar to below:
NOTE: When a "spare" unassigned drive is present on the FastTrak66, a
rebuild will automatically be performed from the remaining working
drive.
39