Cleaning; General Maintenance; Storage; Waste Disposal/Environmental Protection - Parkside POFA 12 A1 Originalbetriebsanleitung

Always wear protective gloves
when handling cutters to avoid cut-
ting yourself.
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.

Cleaning

Do not spray the appliance
with water and do not im-
merse it in water. Electric
shock hazard!
Do not use cleaning agents or sol-
vents. You may otherwise irrepara-
bly damage the appliance.
Keep clean the ventilation slots, motor
housing and handles of the appliance. Use
a damp cloth or a brush.

General maintenance

• Prior to every use, check the appliance
for obvious defects such as loose, worn
or damaged parts.
• If the ball bearing (a) of a
cutter has come loose, re-tighten
it using an Allen key.

Storage

• Clean the device prior to storage.
• Store the appliance in a dry place well
out of reach of children.
• Store the cutter in the packaging includ-
ed in the delivery. Avoid contact with
other metal parts or cutter blades.
Waste Disposal/envi-
ronmental protection
Be environmentally friendly.
Return the tool, accessories and packag-
ing to a recycling centre when you have
finished with them.
Electrical machines do not belong
in domestic waste.
Remove the rechargeable battery before
disposing of the appliance!
Take the equipment to a waste disposal
site. The plastic and metal parts that are
used can be separated out into pure
grade, which allows recycling. Ask our
Service Centre for details.
Defective units returned to us will be
disposed of for free.
a
GB MT
55