Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. Removable test leads
The
PeakTech
connection cables with a 4mm safety plug
and removable test leads with 4mm
safety sockets.
Connect the red test lead to the red lead
and the black test lead to the black lead
to use the enclosed probes.
Alternatively, connect appropriate test
leads to the 4mm leads, which are firmly
connected to the multimeter.
7. Maintenance
Your digital multimeter is a precision electronic device. Do not tamper with
the circuitry. To avoid damage:
a)
Never connect more than 600 V DC or AC
Never connect a source of voltage with function switch on Ω position
b)
and
c)
Never operate the DMM unless the battery cover is in place and fully
closed.
d)
Battery replacement should only be done after the test leads have
been disconnected and power is off.
1020
A
has
- position.
fixed
rms
32
Werbung
Inhaltsverzeichnis
