Inhaltsverzeichnis
Werbung
Gleich- Wechselstrom
Erdung
Batterie-Symbol
)))
Durchgangsprüfung
°
Diodentest
┤├
Kapazitätstest
Sicherung
Bestätigt die Standards der Europäischen Union.
1.2. Maximal zulässige Eingangswerte
Messfunktion
Eingangsbuchsen
V DC
V AC
V/Ω/Hz/
Ω
mA DC/AC
µA, mA + COM
10 A DC/AC
10 A + COM
)))
°
Frequenz
Temperatur
V/Ω/Hz/
Kapazität
der Europäischen Union.
max.
max.
zulässige
zulässige
gangsspannung bzw.
gangsspannung bzw.
-strom
1000 V DC/1000 V AC
1000 V DC/
1000 V DC/1000 V AC
1000 V DC/
+COM
250 V DC/AC
250 V DC/AC
0,63 A/1000 V DC/AC
00 V DC/AC
10 A/ 1000 V DC/AC
00 V DC/AC
250 V DC/AC
250 V DC/AC
250 V DC/AC
250 V DC/AC
250 V DC/220 V AC
250 V DC/
+COM
250 V DC/AC
250 V DC/AC
-5-
*
Scroll through the list of installed devices till you locate the
Scroll through the list of installed devices till you locate the
Ports (Com and LPT) entry. Click the
entry to view the installed ports, If no errors occur, the
entry to view the installed ports, If no errors occur, the
Sunplus USB to Serial COM Port (COM x) will appear, COM
Sunplus USB to Serial COM Port (COM x) will appear, COM
x is just the proper port, here x is a specific number.
x is just the proper port, here x is a specific number.
5. Select the default sampling
Select the default sampling rate or you can select other desired
sampling rate.
6. Now press the Start in the PC
the synchronic data or graph in the software interface.
synchronic data or graph in the software interface.
7. To disable the serial data output function, switch the meter to
To disable the serial data output function, switch the meter to
OFF location first.
8. More information about the PC
More information about the PC-LINK SOFT, please refer to the
Help topic including in the SOFT
topic including in the SOFT
Ein
Ein-
7. Care and Maintenance
7. Care and Maintenance
7.1. Installing the battery
eff
Your meter requires a 9 V battery for power. The battery symbol
Your meter requires a 9 V battery for power. The battery symbol
eff
appears when the battery voltage drops to the certain limits. For
proper operation, replace the battery as soon as possible. Continued
proper operation, replace the battery as soon as possible. Continued
use with a low battery will lead to abnormal readings.
use with a low battery will lead to abnormal readings.
Warning!
To avoid electric shock, disconnect both test leads from equipment
To avoid electric shock, disconnect both test leads from equipment
before you remove or install the battery.
you remove or install the battery.
eff
entry. Click the plus (+) beside this
in the PC-LINK SOFT to measure and view
battery voltage drops to the certain limits. For
-54-
Werbung
Inhaltsverzeichnis
