Preparing Trimmer For Operation - Stihl FSA 90 Gebrauchsanleitung

5 Preparing Trimmer for Operation

► Remove the battery.
► If a metal cutting attachment is mounted: Fit
the transport guard.
► Store the brushcutter out of the reach of
children.
■ Dampness can corrode the electrical contacts
on the brushcutter and metal components.
This can damage the brushcutter.
► Move the retaining latch to the
► Remove the battery.
► Store the brushcutter in a clean and dry
condition.
4.10.2 Battery
WARNING
■ Children are not aware of and cannot assess
the dangers of the battery and can be seri‐
ously injured.
► Store the battery out of the reach of chil‐
dren.
■ The battery is not protected against all ambi‐
ent conditions. The battery may be damaged if
it is exposed to certain ambient conditions.
► Store the battery in a clean and dry condi‐
tion.
► Store the battery in a confined space.
► Store the battery separately from the trim‐
mer and charger.
► Store the battery in non-conductive packag‐
ing.
► Use and store the battery at temperatures
between -10°C and +50°C.
4.11 Cleaning, Maintenance and
Repair
WARNING
■ The brushcutter may start up unintentionally if
the battery is left in place during cleaning,
maintenance or repair operations. This may
result in serious injury to people and damage
to property.
► Move the retaining latch to the
► Remove the battery.
■ Aggressive cleaning agents, a water jet or
pointed objects can damage the trimmer,
0458-709-9821-D
deflector, cutting attachment and battery. If the
brushcutter, deflector, cutting attachment or
battery are not cleaned correctly, components
may no longer function properly or safety devi‐
ces may be rendered inoperative. They may
cause serious injury to persons.
► Clean the brushcutter, deflector, cutting
attachment and battery as described in this
User Manual.
■ If the brushcutter, deflector, cutting attachment
or battery are not serviced or repaired cor‐
rectly, components may no longer function
position.
properly or safety devices may be rendered
inoperative. This may result in serous or fatal
injury to people.
► Do not attempt to service or repair the trim‐
mer, deflector, cutting attachment or bat‐
tery.
► If the trimmer, deflector, cutting attachment
or battery require servicing or repairs: Con‐
tact your STIHL servicing dealer for assis‐
tance.
► Maintain the cutting attachment as descri‐
bed in the User Manual supplied with the
cutting attachment being used or on the
cutting attachment's packaging.
5
5.1
The following steps must be performed before
commencing work:
► Ensure that the following components are in
safe condition:
– Brushcutter,
– Deflector,
– Mowing head or metal cutting attachment,
– Battery,
► Check the battery,
► Fully charge battery as described in the User
Manual for chargers STIHL AL 101, 300, 500.
► Clean the brushcutter,
► Mount the handle,
► Select combination of cutting attachment,
deflector and carrying system,
position.
► Mount the deflector,
► If a metal cutting attachment is used on a
loop-handled trimmer: Mount the barrier bar,
7.2.
► Mount mowing head or metal cutting attach‐
ment,
Preparing Trimmer for
Operation
Preparing the Brushcutter for
Operation
4.6.1.
4.6.2.
4.6.3 or 4.6.4.
4.6.5.
11.2.
16.1.
7.1.
7.3.1.
7.4.1 or 7.5.1.
English
21.
33