Ir Remote Control (Optional) - Cameo ROOT PAR BATTERY Bedienungsanleitung

--------Menu-------
DMX Address
DMX Mode
DMX Delay
Stand Alone
Slave
Settings
System Info
This will take you to the submenu which will let you access system information (see table, use
 and  to select, press ENTER to confirm, use  and  to change status, press ENTER to
confirm).
System Info
Firmware = Displays the
device firmware
Tempera- = Displays tem-
ture perature of the
LED unit
Op Hours = Displays
operating time

IR REMOTE CONTROL (optional)

Aim the infrared remote control directly, within line-of-
sight, at the infrared sensor installed on the front side of
the spotlight. The maximum range is approx. 8 meters. The
spotlight's sensor is deactivated in DMX and slave mode.
The infrared remote control directly controls the internal
stand-alone modes Auto / Sound, Static, and Color
Preset.
BL / ON/OFF (Blackout)
The BL (Blackout) button switches off all LEDs, regardless
of which mode is activated via the remote control. Press the
BL button again to reactivate the previously selected mode.
SP (Speed)
6-speed setting for the color change programs: Color Jump-
ing (Ju), Color Fading (Fa), and Auto Program (Au). Level
1 allows the color change sequence to progress slowly,
pressing it again activates level 2 with a faster change sequence, and this is followed by levels 3,
4, 5, and 6, where level 6 is the fastest sequence of color changes.
20
Firmware
V1.xx
LED xxx°C / xxx°F
Unit °C (= displays in degrees Celsius)
°F (= displays in degrees Fahrenheit)
xx:xxh Displays the total operating time in hours
and minutes