Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MANUAL LOCKING FUNCTION
In addition to the ability to protect the lamp automatically from accidental and unauthorised operation (see "Settings" - "Auto-lock"), the
controls can also be locked manually. Press and hold the UP and DOWN controls simultaneously for approximately 5 seconds. If an attempt
is made to change settings, "Locked!" will appear in the display and changing the lamp's settings via the controls is no longer possible.
After approx. 1 minute, the current operating mode is displayed again. To unlock, press and hold the UP and DOWN controls simultaneously
for approximately 5 seconds.
The display will show the previously displayed information.
IR REMOTE CONTROL
BLAC K
SOUN D
AU TO
OUT
SENS I
STROBE
SPEED
TIVITY
%
MANUAL
FADE
R
G
B
A
W
UV
+
-
0
1
2
3
4
5
6
7
8
9
12
Aim the infrared remote control directly at the infrared sensor on the front of the lamp. The maximum
range is approximately 8 metres. In DMX and Slave modes, the remote control is deactivated. Battery
for IR remote control = CR2025.
-
Blackout
Auto-programme
Strobe
Speed
Brightness
Manual colour mix
Fade programmes
-
Colour preset
The blackout button is used to switch off all LEDs, regard-
less of operating mode enabled via the remote control.
Press the blackout button again to reactivate the previously
selected mode.
Auto-Programmes 1 - 6. Programme selection with
and
. Programme run speed with
and
. Brightness setting with
No function.
Strobe light for AUTO, FADE and MANUAL operating modes.
Press
to activate. Strobe speed with
Press
to deactivate strobe.
Setting the running speed for Auto and Fade programmes.
No function.
Press
and
and
to adjust brightness.
Press
and
,
,
colours. Adjust intensity with
Fade programmes Auto 1 - Auto 5. Programme selection
with
and
. Programme run speed with
and
. Brightness setting with
and
.
Direct selection of colour presets 0 to 9.
and
and
and
.
and
.
or
to manually mix
and
.
and
and
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
