Connections, Operating And Display Elements - Cameo ROOT PAR BATTERY Bedienungsanleitung

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS

POWER IN
1
Blue Power Twist power input socket. Operating voltage: 100–240 V AC / 50–60 Hz. A suitable
power cable with Power Twist plug is included in the package contents.
POWER OUT
2
White Power Twist power output socket to supply power to additional Cameo spotlights (max. 8 A).
DMX IN
3
Male 3-pin XLR connector to connect a DMX control device (e.g., DMX console).
DMX OUT
4
Female 3-pin XLR connector to transmit the DMX control signal.
iDMX
5
Connection for the optionally available iDMX stick for W-DMX™ connection.
FUSE
6
Fuse holder for 5 × 20 mm micro fuses. IMPORTANT NOTE: Only replace the fuse with a fuse of
the same type and values. If a fuse trips repeatedly, please contact an authorized service center.
POWER
7
Push switch for switching the spotlight on and off.
5
2 1
3
4
9