Cameo ROOT PAR BATTERY Bedienungsanleitung Seite 12

MAIN DISPLAY STAND-ALONE MODE
The display shows the currently activated stand-alone mode (Mode Auto, Mode Sound, Mode
Static, Mode Color Preset, Mode User Color, Mode Loop). The battery's charging status is shown
in five segments in the upper-right corner of the display. When the spotlight is operated with a
supply voltage, the internal battery is charged at the same time and a lightning symbol appears
next to the battery symbol.
MAIN DISPLAY SLAVE MODE
Mode Slave is shown on the display. If the slave unit is assigned to a slave group, the slave
group and delay time set on the master unit in the stand-alone modes Auto and Loop are also
displayed. The battery's charging status is shown in five segments in the upper-right corner of the
display. When the spotlight is operated with a supply voltage, the internal battery is charged at the
same time and a lightning symbol appears next to the battery symbol.
CONFIGURING THE DMX START ADDRESS
You can access the main menu by pressing MENU. Using the  and  buttons, now select the
DMX Address menu option and press ENTER to confirm your selection. You can now set the DMX
start address as desired using  and . Press enter to confirm your selection and then press
MENU once to return to the main screen. If there is no input within approx. two minutes, the main
display is automatically activated.
--------Menu------- ----DMX Address----
DMX Address DMX Address
001–512
DMX Mode DMX Mode
DMX Delay DMX Delay
Stand Alone
Slave
Settings
System Info
SETTING DMX MODE
You can access the main menu by pressing MENU. Using the  and  buttons, now select the
DMX Mode menu option and press ENTER to confirm your selection. Use  and  again to
select the desired DMX mode and press ENTER to confirm your selection (DMX operating modes
with DMX delay channel are labeled with "D"). Press MENU once to return to the main screen. If
there is no input within approx. two minutes, the main display is automatically activated. You can
12