Ir Remote Control (Optional) - Cameo ROOT PAR TW Bedienungsanleitung

IR REMOTE CONTROL (optional)

Aim the infrared remote control directly, within line-of-sight,
at the infrared sensor installed on the front side of the
spotlight. The maximum range is approx. 26.24 feet. The
spotlight's sensor is deactivated in DMX and slave mode.
The infrared remote directly controls the internal stand-
alone modes: DIRECT, CCT, and LOOP/SOUND.
BL / ON/OFF (Blackout)
The BL (Blackout) button switches off all LEDs, regardless
of which operating mode is activated via the remote control.
Press the BL button again to reactivate the previously
selected mode.
SP (Speed)
11-step speed setting for the lighting sequence in the
stand-alone mode Loop (Au). Step 1 allows the lighting
sequence to progress quickly, pressing it again activates
step 2 with a slower color change sequence, and this is followed by steps 3, 4, 5, etc., where
step 11 is the slowest lighting sequence.
☼ ☼ (Brightness)
Set the overall brightness in six steps. Press this button several times (Step 1 = blackout) to
access the different brightness levels.
FL (Flash / Stroboskop)
Speed setting for the strobe effect in six steps. Step 1 deactivates the strobe effect, step 2 pro-
duces a slow frequency followed by steps 3 to 5. Step 6 produces the fastest flash frequency. The
strobe effect can only be used in the CW/WW color mixing mode.
CW und WW (R, G, B, W, A, UV ohne Funktion)
These two buttons allow individual color temperatures to be created by mixing cold white and
warm white. The six brightness levels can be accessed by pressing the respective color button
again, where level 1 means that the LEDs are switched off.
Ju (no function)
Fa (no function)
Au (Loop mode)
Press the Au button to start the stand-alone mode Loop. Use the Speed button to control the
speed of the lighting sequence.
18