Ir Remote Control (Optional) - Cameo ROOT PAR 4 Bedienungsanleitung

IR REMOTE CONTROL (optional)

Aim the infrared remote control directly at the infrared sensor on the front of the spotlight. The maximum range is approximately 8 metres.
In DMX and slave modes, the spotlight's IR sensor is deactivated. The infrared remote control directly controls the internal standalone
modes Auto/Sound, Static and Color Preset.
BL/ON/OFF (Blackout)
Press the BL button to switch off all LEDs (blackout), regardless of the operating mode enabled via remote control. Press the BL button again
to reactivate the previously selected mode.
SP (Speed)
Six-level speed setting for the color change programme Color Jumping (Ju), Color Fading (Fa) and Auto Programme (Au). Level 1 provides a
slow color-change sequence. Press again to activate level 2 for a faster color-change sequence, and repeat for levels 3, 4, 5 and 6, whereby
level 6 provides the maximum color-change sequence speed.
(Brightness)
Sets the overall brightness in six levels. The different brightness levels can be accessed by repeatedly pressing this button (level 1 =
blackout).
FL (Flash/Stroboscope)
Six-level speed setting for the strobe effect. Level 1 deactivates the strobe effect, level 2 produces a slow flash frequency, followed by levels
3 to 5. Level 6 produces the fastest flash frequency. The strobe effect can only be used in the color blending mode (RGBW(A+UV).
R/G/B/W (A and UV only in model CLROOTPAR6, CW and WW without function)
Individual color blends can be created with these 4 (6) buttons. The six brightness levels can be accessed by repeatedly pressing the
respective color button, whereby the LEDs are switched off at Level 1. Example: Set red and green at the maximum level and the remaining
LEDs at the lowest level (i.e. off), and you will achieve a bright yellow color blend.
Ju (color change)
Color changes jump (color jumping). The speed at which the colors change is set with the SP (Speed) button.
Fa (Color Fade)
Colors fade into each other (color fading). The speed at which the colors change is set with the SP (Speed) button.
Au (Auto Mode)
Select the desired color change programme Auto 1–6 by repeatedly pressing the Au button.
16