Cameo ROOT PAR BATTERY Bedienungsanleitung Seite 16

--------Menu------- ----Stand Alone----
DMX Address Auto
DMX Mode Static
DMX Delay Color Preset
Stand Alone User Color
Slave
Loop
Settings
System Info
USER COLOR STAND-ALONE MODE
The stand-alone mode User Color makes it possible to save the overall brightness, strobe, and
a color mix of R, G, B, and W to four individual color presets directly on the device.
Starting from the main display, press MENU to go to the main menu. Using the  and 
buttons, now select the Stand Alone menu option and press ENTER to confirm your selection.
Use  and  again to select the stand-alone mode User Color and press ENTER to confirm
your selection. Now use  and  to select the desired preset (Color 1 to Color 4) and press
ENTER to confirm. Now use  and  to select the menu option you would like to change and
press ENTER to confirm your selection. You can set the value as desired from 000 to 255 using
 and . The strobe effect values correspond to the values in channel 2 of the DMX table 4 CH
mode 1. Press ENTER to confirm all entries.
--------Menu------- ----Stand Alone----
DMX Address Auto
DMX Mode Static
DMX Delay Color Preset
Stand Alone
User Color
Slave
Loop
Settings
System Info
LOOP STAND-ALONE MODE
The stand-alone Loop mode allows up to four different color change programs to be individually
designed, saved, and reproduced. Brightness, step time, fade time, and delay (signal delay) can
be set separately.
Starting from the main display, press MENU to go to the main menu. Using the  and 
buttons, now select the Stand Alone menu option and press ENTER to confirm your selection.
Use  and  again to select the stand-alone mode Loop and press ENTER to confirm your
selection. Now use  and  to select the desired loop (Loop 1 to Loop 4) and press ENTER to
confirm your selection.
--------Menu------- ----Stand Alone----
DMX Address Auto
DMX Mode Static
DMX Delay Color Preset
Stand Alone User Color
Slave Loop
Settings
System Info
16
----Color Preset----
Off
Cyan 0 - 100
Red 0 - 100
Blue 0 - 100
Amber 0 - 100
Lavender 0 - 100
Yel Warm 0 - 100 0 - 100
Mauve
Yellow 0 - 100 0 - 100
Magenta
Green 0 - 100 0 - 100
Pink
Turquoise
0 - 100 Warm White 0 - 100
----User Color----
-------Color x-------
Color 1
| Dimmer 0 - 255
Color 4 Strobe 0 - 255
Red 0 - 255
Green 0 - 255
Blue 0 - 255
White 0 - 255
----Loop Mode---- ---------Loop x---------
Loop 1 Dimmer
| Steptime 0.1s - 10.0s
Loop 4 Fadetime 0 % - 100 %
Delay
1.Step
2.Step
3.Step
4.Step
White 0 - 100
Cold White 0 - 100
Jump 0 - 100
Fade 0 - 100
Speed 0 - 100
0 - 100
0.0s - 2.0s
Red
Green
Black
-------