Oled-Display; Control Buttons - Cameo ROOT PAR BATTERY Bedienungsanleitung

OLED-DISPLAY

8
The OLED display shows the currently activated mode (main display), the menu options in the
Options menu, and the numerical values or operating status for certain menu options . If there is
no input within approx. two minutes, the information in the display automatically switches to the
main display. Note on the main display in operating modes with external control: As soon as the
control signal is interrupted, the symbols on the display will begin to flash. When the control signal
is present again, the flashing will stop. Starting from the main display, briefly press the  button
to rotate the information in the display 180°.

CONTROL BUTTONS

9
MENU – you can access the options menu by pressing MENU. Pressing it again will return you
to the main display. If you press MENU without having first pressed ENTER to confirm a value or
status change, the previously confirmed value or status shall be restored.
ENTER – pressing ENTER takes you to the menu level, where value changes can be made, and
you can reach the submenu using ENTER. Value or status adjustments can also by confirmed
by pressing ENTER.  and  – these select the individual menu options in the selection menu
(DMX address, mode, etc.) and in the submenus. They allow you to change the value of a menu
option (e.g., DMX address) as desired.
10
12
7
10
12
11
12
8
9
12
13
6