Documentation; Safety Information; Intended Use; Identification Of Dangers And Notes - Siko IMS360 Montageanleitung

IMS360

Documentation

1 Documentation
The following documents describe this product:
•
•
•
These documents can also be downloaded at
com/p/ims360".

2 Safety information

2.1 Intended use

The inclinometer IMS360 is a simple, highly integrated and compact mea-
suring instrument. It is used exclusively for the acquisition of absolute
angular positions to the plumb bob as well as for the preparation and pro-
vision of the measured values as electrical output signals for the subse-
quent device. The inclinometer may only be used for this purpose.
1. Observe all safety instructions contained herein.
2. Read all documents provided on our homepage.
3. Arbitrary modifications and changes to this inclinometer are forbid-
4. Observe the prescribed operating and installation conditions.
5. Operate the inclinometer exclusively within the scope of technical

2.2 Identification of dangers and notes

Safety notes consist of the signal symbol and a signal word.
Danger classes
Immediate danger that may cause irreversible bodily harm resulting in
DANGER
death, property damage or unplanned device reactions if you disregard
the instructions given.
Danger that may cause serious bodily harm, property damage or
WARNING
unplanned device reactions if you disregard the instructions given.
IMS360 · Date 04.04.2023 · Art. No. 91019 · Mod. status 56/23
The data sheet describes the technical data, the dimensions, the pin
assignments, the accessories and the order key.
The installation instructions describe the mechanical and electrical
installation including all safety-relevant requirements and the associ-
ated technical specifications.
The user manual and software description for commissioning and inte-
grating the inclinometer into a fieldbus system.
den.
data and the specified limits (see chapter 8).
English
"http://www.siko-global.
15