Service Menu; Service Screen; Settings - Vieweg DC 1200 Bedienungsanleitung

Operating Instructions DC 1200
• Cycle counter:
The cycle counter counts the dispensing procedures after switching ON the
DC 1200 . The memory of the cycle counter is volatile and gets reset to 000000 after
switching OFF the unit .
• Keylock:
By pressing SAVE + PROG at the same time, a key lock for the dispenser can be
activated . An activated key lock is shown in the display (lower right hand corner) as
a lock .
By pressing SAVE + PROG again, the keylock is deactivated .

7 Service Menu

7.1 Service screen

For entering the service menu hold the buttons UP and DOWN pressed at the same
time while switching on the device .

7.2 Settings

By pressing the SELECT button you can step to the next menu option .
The asterisk marks your actual position .
• Language:
The system language can be switched between german to english by pressing
UP or DOWN button
• Boot Logo:
The boot logo can be changed when you type a 4-digit code . This should only be
done by the manufacturer .
29
VIEWEG