General Information; The Dc 1200; Intended Use - Vieweg DC 1200 Bedienungsanleitung

VIEWEG

1 General information

Dear customer,
Thank you for choosing our model DC 1200 dispensing controller .
To ensure proper operation, please carefully read the following pages for correct
operating and maintenance instructions . Keep these instructions handy for future reference .
If you require further information or if you have any questions please contact us directly at
Phone: +49 8166 6784 -0
Email: info@dosieren . d e

1.1 The DC 1200

The digital dispense controller series DC 1200 can be built up with different options,
with technical differences . Therefor, in the following manual is only spoken about the DC
1200 .
The digital dispenser DC 1200 is used for precise control of pneumatic dispensing with
for example 3 – 80 cc cartridges .
The air output pressure for the cartridge is adjustable with the integrated pressure
regulator . An integrated digital pressure sensor at the inlet air gives an additional point
for the process safety .

1.2 Intended Use

The device is designed and constructed for commercial use . It is only to be used for
dispensing liquid and paste materials such as adhesives, lubricants, various pastes, grease,
oil, silicone and other similar materials . Any other use is considered improper . If this device
is used for other purposes, personal injury or damage to property may result .
The manufacturer assumes no responsibility for consequences resulting from improper
use of the unit .
Non-intended use, which would also void the warranty, includes:
• Changes to the device not expressly recommended in the operating instructions
• Modifications to the unit and its components
• Use of incompatible or damaged spare parts
• Use of non-approved accessories or auxiliary equipment
• Exceeding the approved and recommended pressures
Operating Instructions DC 1200
20