Operating Keys - Vieweg DC 1200 Bedienungsanleitung

Operating Instructions DC 1200

5.4 Operating keys

PROG - switches to the next program
By pressing the PROG-Button you will get to the start screen where
you can choose the dispensing program .
SAVE - saves the actual parameters
Press the SAVE key for 2 sec . and select the wanted program with the
UP and DOWN keys and press SAVE again to store the parameters . If no
different program is selected, the parameters get automatically saved in
the actual program .
PURGE - starts the dispensing procedure
UP - increases the selected value .
Pressing on the UP key once increases the last digit by one .
By holding the button pressed you can scroll to the wanted value .
DOWN - decreases the selected value
Pressing on the Down key once decreases the last digit by one .
By holding the button pressed you can scroll to the wanted value .
SELECT
The SELECT key moves the asterisk to the next display line .
27
VIEWEG