Diagnostic Data - Balluff BLA D-Serie Betriebsanleitung

BLA Series D
Balluff Light Array
6
IO-Link interface (continued)
For the analog and object output values, the different
modes can be selected via the following settings:
Value Mode
0 Disable
1 Left object
2 Left slit
3 Right object
4 Right slit
5 Diameter
Tab. 6-7: Object output modes
*: Modes 9, 10 and 11 are not available for the analog
output values.
www.balluff.com
Value Mode
6 Slit
7 Object position
8 Slit position
9 Objects counting*
10 Slits counting*
11 Any object*
6.3.4

Diagnostic data

The data described in the diagnostic area may be accessed
through following indices:
Index Name
0x52 Temperature
- Up-to-date
- Min. since power-on
- Max. since power-on
- Min. since first start-up
- Max. since first start-up
0x53 Temperature alarm value
- Lower limit
- Upper limit
0x54 Laser
- Status
- ID
- Serial number
- Operating time [s]
- Number of switch-on
procedures
- Operating current
- Temperature
- Error
0x57 Operating time
- since power-on [s]
- total [s]
- since maintenance [s]
0x58 Switch-on procedures
- total
- since maintenance
0xE0 Optical properties
- Ambient light minimum
- Ambient light maximum
- Laser light minimum
- Laser light maximum
- Sampling period in 0.1 ms
Tab. 6-8: Diagnostic data
Sub- Size Access
index
1 UINT16 R
2 UINT16 R
3 UINT16 R
4 UINT16 R
5 UINT16 R
1 UINT8 R
2 UINT16 R
1 UINT32 R
2 UINT32 R
3 UINT32 R
4 UINT32 R
5 UINT32 R
6 UINT32 R
7 UINT32 R
8 UINT32 R
1 UINT32 R
2 UINT32 R
3 UINT32 R
1 UINT32 R
2 UINT32 R
1 UINT16 R
2 UINT16 R
3 UINT16 R
4 UINT16 R
5 UINT16 R
english 19