Menu Structure; Display Settings; Locking Operation - Balluff BLA D-Serie Betriebsanleitung

BLA Series D
Balluff Light Array
5
Display and menu (continued)
5.2

Menu structure

By pressing the • key, you move from the measured value
display to the menu. This is structured as follows:
Device settings Description/Indication
Normalize Signal normalizing
Display Change display settings
SleepTime
Rotation
Contrast
Blanking Restrict measuring field
left
right
Analog outputs Configuration of analog outputs
(voltage, current) *
AOut1 Analog output 1
AOut2 Analog output 2
Analog calibrate Calibration of the analog outputs*
A1 calibrate U
Min
Max
A1 calibrate I
Min
Max
A2 calibrate U
Min
Max
A2 calibrate I
Min
Max
Digital outputs Configuration of digital outputs*
DO1
DO2
DO3
Reset Reset application
Restart App
Restart
Reset Service
Default Settings
Output settings Configuration of the measuring
modes and output values
Analog output 1 Analog output 1
Mode
Average
Scale
Offset
Analog output 2 Analog output 2
Mode
Average
Scale
Offset
Digital outputs Object recognition
Mode
Object
Size
Tolerance
16 english
Time till automatic display turn-off
Rotate display
Change contrast / brightness
Restriction from the left
Restriction from the right
(0..10 V, 10..0 V, 20..4 mA, 4..20 mA)
(0..10 V, 10..0 V, 20..4 mA, 4..20 mA)
Output 1 – Output voltage
Minimum value
Maximum value
Output 1 – Output electricity
Minimum value
Maximum value
Output 2 – Output voltage
Minimum value
Maximum value
Output 2 – Output electricity
Minimum value
Maximum value
PNP, NPN, Aus
PNP, NPN, Aus
PNP, NPN, Aus
Restart the measuring functions
Restart the device
Resetting the maintenance interval
Reset to factory defaults
Mode
Averaging over several measurements
Scale
Offset
Mode
Averaging over several measurements
Scale
Offset
Mode
Objekt number
Characteristic value
Tolerance
Diagnostic Diagnostic data
Live Live image (Monitor)
Signal Info Light band characteristics
Amb. Ambient light min. and max.
Sig. Signal min. and max.
Period Sampling period
Device Status Device Status
PU Hours since power up
LT Life time in hours and number of
starts
SV Hours and number of starts since
reset of the service interval
Device Info Device information
BLA ... Type code
SN Serial number
HwRev. Hardware Revision
FwRev. Firmware Revision
Temperature Temperature
PU Min. and max. temperature since
switching on
LT Min. and max. temperature in live
time
TH min. and max. temperature for the
error message
Transmitter Status Transmitter status
Ib Transmitter current
Temper. Transmitter temperature
Errors Number of errors that occurred
Transmitter Info Transmitter information
ID ID number
SN Serial number
Time Transmitter operating hours
OnCnt Number of starts of the transmitter
Lock Operation locking
Lock Lock settings
Unlock Edit settings
* are only available for the standard variant.
5.3

Display settings

The menu item "Display" allows you to set the display cha-
racteristics. The item "Sleep Time" can be used to set the
time until the display switches off automatically after the last
keystroke. The item "Rotation" allows to rotate the display
by 180° in order to facilitate the reading of the menu in case
the device is mounted upside down. The "Contrast" setting
allows you to adjust the contrast or brightness of the dis-
play.
5.4

Locking operation

Input via the control panel can be locked under the item "Lock"
to protect the device against unintentional adjustment. A pad-
lock symbol in the upper right corner of the display indicates
that the unit is locked. The lock can be removed with "Unlock".
For IO-Link devices, the lock function can also be activated via
the IO-Link parameterization. It is also possible to lock the local
user interface. With this function, the keys on the device can be
completely locked and also unlocked only via IO-Link.