Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Data; Accuracy; Ambient Conditions; Power Supply - Balluff BTL6-A/G1-M-A1-S115 Serie Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
BTL6-A/G_1_-M_ _ _ _-A1-S115
Magnetostrictive Linear Position Sensor – Profile Style
6

Technical data

6.1

Accuracy

The values are typical at 24 V DC, room temperature and a
nominal length of 500 mm together with magnet
BTL6-A-3800-2 or BTL6-A-3801-2.
The BTL is fully operational immediately, with full accuracy
after warm-up.
For special versions, other technical data may
apply.
Special versions are indicated by the suffix -SA
on the part label.
Resolution
BTL6-A...
BTL6-G...
Repeat accuracy, typical
Sampling rate
BTL6-_ _11
nominal length ≤ 275 mm
nominal length ≤ 600 mm
BTL6-_ _10
nominal length ≤ 1100 mm
nominal length > 1100 mm
Non-linearity at
nominal length ≤ 500 mm
nominal length > 500 mm
Temperature coefficient
1)
6.2

Ambient conditions

Ambient temperature
Storage temperature
Relative humidity
Continuous shock
per EN 60068-2-27
2)
Vibration
per EN 60068-2-6
2)
Degree of protection as per IEC
60529 with connector installed
10
english
≤ ±0,2 mV/
≤ ±10 µm
≤ ±0,4 mV/
≤ ±10 µm
≤ ±0,2 mV/
≤ ±10 µm
4 kHz
2 kHz
1 kHz
0,5 kHz
± 200 µm
±0.04 % FS
(typ. ±0.02 % FS)
≤ 30 ppm/K
0 °C...+70 °C
−40 °C...+100 °C
< 90%,
non-condensing
50 g/6 ms
50 g/2 ms
12 g, 10 ...2000 Hz
IP67
6.3

Power supply

Stabilized voltage
3)
BTL6-_1_ _-...
BTL6-_3_ _-...
Ripple
Current draw (at 24 V DC)
Inrush current
Reverse polarity protection
Overvoltage protection
Dielectric strength (GND to
housing)
6.4

Output signals

Output voltage
BTL6-A...
BTL6-G...
Load current
6.5

Dimensions, weights

Housing diameter
Nominal length
Weight (depends on length)
Housing material
Nominal length = 500 mm, magnet in the middle of the measuring range
1)
Individual specifications as per Balluff factory standard, resonant
2)
frequencies excluded
For
: The BTL must be externally connected via a limited-energy
3)
circuit as defined in UL 61010-1, a low-power source as defined in
UL 60950-1 or a class 2 power supply as defined in UL 1310 or UL 1585.
20...28 V DC
20...28 V DC
≤ 0.5 V
pp
≤ 100 mA
≤ 3 A
to 36 V
up to 33 V (power lines
only)
500 V DC
0...+10 V
–10...+10 V
≤ 5 mA
30 mm
50...1500 mm
Approx. 1 kg/m
Aluminum

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis